Galley Equipment
critical
Known Models (3)
Electrolux Professional Marine (Sweden) Marine Laundry & Galley Equipment
10-200 Persons
· Food Preparation / Laundry
Voltage: 380-440V 3ph
type: Marine Galley + Laundry Equipment
size_range: ['Cooking Range', 'Combi Oven', 'Washer-Extractor', 'Dryer']
variant_count_approx: 4
period_start_year: 1990
period_end_year: None
drive_type: Electric / Steam
construction: Stainless steel, marine-vibration-tested
Common Failures:
- • Heating element failure
- • Washer-extractor bearing wear from ship motion
- • Dryer drum belt wear
- • Steam connection leak
- • Control board failure from humidity
Service: Heating elements annually. Washer bearings every 3-5 years. Dryer lint filter cleaning after each use.
Spares: Electrolux Professional Marine (Stockholm). Lead time: 2-4 weeks.
Hobart / Illinois Tool Works (USA/Germany) Marine Dishwasher / Food Prep
50-300 covers/hour
· Dishwashing / Food Preparation
Voltage: 380-440V 3ph
type: Commercial Dishwasher / Food Prep Equipment (Marine)
size_range: ['Hobart AM', 'Hobart FT', 'Hobart Mixer']
variant_count_approx: 3
period_start_year: 1970
period_end_year: None
drive_type: Electric
construction: Stainless steel, marine-certified
Common Failures:
- • Wash pump motor failure
- • Heating element burnout
- • Door seal deterioration
- • Rinse aid dosing pump failure
- • Drain valve blockage
Service: Wash pump check quarterly. Heating element annually. Door seal inspection monthly. Descale monthly in hard water areas.
Spares: Hobart/ITW (Offenburg, Germany). Lead time: 1-3 weeks. Excellent global availability.
Metos / Ali Group (Finland/Italy) Marine Galley Equipment Range
10-300 Persons catering
· Food Preparation / Cooking
Voltage: 380-440V 3ph / 230V 1ph
type: Marine Galley Equipment (Cooking, Baking, Dishwashing)
size_range: ['Proveno Cooking Range', 'Proveno Oven', 'Dishwasher', 'Cold Room']
variant_count_approx: 4
period_start_year: 1980
period_end_year: None
drive_type: Electric / Steam
construction: Stainless steel AISI 316, marine-vibration-tested, tilting kettles, ovens, dishwashers
Common Failures:
- • Heating element burnout in ovens/ranges after 5,000-10,000 hrs
- • Dishwasher pump seal failure from detergent corrosion
- • Tilting kettle hydraulic cylinder seal leak
- • Steam valve corrosion/seizure
- • Thermostat failure causing overheating
Service: Heating element check annually. Dishwasher pump seal inspection quarterly. Steam trap function test monthly. Thermostat calibration annually. Hygiene inspection per ISM/MLC.
Spares: Metos/Ali Group (Helsinki/Milan). Lead time: 2-4 weeks. Heating elements: keep spares onboard.