Self-Priming Pump
medium
Self-priming pumps for bilge, stripping, and dirty water service
Known Models (5)
Azcue BT-HN
25-100 m³/h @ 2 bar
· 7.5 kW
· Bilge Water
· Self-Priming Centrifugal
medium: Bilge Water
power_kw: 7.5
type: Self-Priming Centrifugal
Common Failures:
- • Suction air leak
- • Impeller clogging
- • Mechanical seal wear
Service: Self-priming up to 6m. Suitable for oily water. Clean impeller if performance drops.
Spares: Azcue: Ersatzteile per Hersteller-Ersatzteilliste. Mechanische Dichtungen und Laufräder an Bord vorhalten. Lead time: 2-6 Wochen je nach Hersteller.
IMO AB KAM
50-200 m³/h @ 2-4 bar
· 18.5 kW
· Bilge Water
· Self-Priming Centrifugal
medium: Bilge Water
power_kw: 18.5
type: Self-Priming Centrifugal
Common Failures:
- • Priming chamber wear
- • Impeller clogging from debris
- • Shaft seal failure
- • Suction check valve stuck
Service: Self-priming up to 7m suction lift. Clean strainer before each use. Test suction annually.
Spares: IMO AB: Ersatzteile per Hersteller-Ersatzteilliste. Mechanische Dichtungen und Laufräder an Bord vorhalten. Lead time: 2-6 Wochen je nach Hersteller.
Naniwa Pump NP-B
30-80 m³/h
· 7.5 kW
· Bilge Water
· Self-Priming Bilge
medium: Bilge Water
power_kw: 7.5
type: Self-Priming Bilge
Common Failures:
- • Priming chamber air leak
- • Impeller fouling
- • Check valve failure
Service: Emergency bilge pump. Test weekly. Maintain clean suction strainers at all bilge wells.
Spares: Naniwa Pump: Ersatzteile per Hersteller-Ersatzteilliste. Mechanische Dichtungen und Laufräder an Bord vorhalten. Lead time: 2-6 Wochen je nach Hersteller.
Shinko Ind. RVS Series
30-100 m³/h
· 11.0 kW
· Bilge Water
· Self-Priming Vortex
medium: Bilge Water
power_kw: 11
type: Self-Priming Vortex
Common Failures:
- • Vortex impeller wear
- • Suction valve leakage
- • Casing corrosion
Service: Solids-handling capability for oily bilge water. Flush with clean water after use.
Spares: Shinko Ind.: Ersatzteile per Hersteller-Ersatzteilliste. Mechanische Dichtungen und Laufräder an Bord vorhalten. Lead time: 2-6 Wochen je nach Hersteller.
Shinko Ind. EVA Series
30-150 m³/h
· 15.0 kW
· Bilge Water
· Self-Priming Centrifugal
medium: Bilge Water
power_kw: 15
type: Self-Priming Centrifugal
Common Failures:
- • Priming failure from worn seals
- • Impeller erosion
- • Motor overload from debris
Service: Emergency bilge pump on many Japanese-built vessels. Test monthly per SOLAS requirements.
Spares: Shinko Ind.: Ersatzteile per Hersteller-Ersatzteilliste. Mechanische Dichtungen und Laufräder an Bord vorhalten. Lead time: 2-6 Wochen je nach Hersteller.